Guide

How to Open a Honeywell Safe

Updated on · By the Flood of Dollars team

To open a Honeywell safe, use what the model was built with: turn the key on a key-lock chest, or enter your code on a digital keypad and turn the knob. If the code fails or the battery is dead, the backup key opens it.

On this page (9 sections)
  1. How do you tell which lock your Honeywell safe has?
  2. How do you open a Honeywell fire chest with a key?
  3. How do you open a Honeywell digital safe with a code?
  4. What do you do if the code won't work or the keypad is dead?
  5. Where do you find a replacement Honeywell safe key?
  6. Which Honeywell models does this guide cover?
  7. How should you close and lock a Honeywell safe again?
  8. How does opening a Honeywell safe compare with other brands?
  9. What should you do before you call support?

To open a Honeywell safe, turn the key on a key-lock model or enter your code on a digital keypad and turn the knob. Honeywell builds both kinds, so the first step in learning how to open a Honeywell safe is knowing which lock yours has.

The brand's small safes fall into two families. Molded fire and water chests use a plain key lock.

Steel hideable safes use a digital keypad with a key backup. The steps below cover both.

How do you tell which lock your Honeywell safe has?

Look at the front of the safe: a keyhole alone means a key lock, and a keypad means a digital lock. Honeywell's fire chests carry a key lock, while its steel security boxes carry an electronic keypad with keys as a backup.

Key-lock chests are the simpler type. There is no code to remember and no battery to replace.

The lock sits under a latch or behind the carry handle.

Digital safes show a keypad, usually with a small screen or lights. A hidden keyhole sits behind a cover or beside the keypad for emergency entry.

If the safe is new in the box, check the included components. Honeywell lists the keys and the instruction manual as part of the package on both lock types.

The 1103 chest includes the chest, the manual and a key. The 1102 chest includes two keys and the manual.

The 6108 digital safe includes two emergency access keys.

How do you open a Honeywell fire chest with a key?

Insert the key, turn it, and lift the lid while the side latches are open. Honeywell's molded chests use a key lock and two side latches that clamp the lid down for the fire and water seal.

Start with the latches. Flip both side latches outward before you turn the key, because the lid is pressed tight against its seal.

Forcing the key while the latches hold the lid can strain the lock.

Turn the key a quarter turn and lift the handle. The lid should rise on its hinge without much effort.

If it sticks, check that both latches are fully released.

Close it the same way in reverse. Lower the lid, press it down evenly, then snap both latches shut.

That seal is what makes the chest waterproof, so don't leave a latch loose. The waterproof seal is rated for 100 hours at 39 inches on the 1103 and 24 hours at the same depth on the 1102.

How do you open a Honeywell digital safe with a code?

Enter your code on the keypad and turn the knob within a few seconds. Honeywell's digital safes accept a code you program yourself, and the lock releases when the code matches.

Press the keypad to wake it, then key in your code. Many Honeywell keypad safes expect a short code followed by a turn of the knob, but the exact order varies by model.

Read the manual that came in the box for the sequence on yours.

The keypad needs fresh batteries to respond. If the lights look dim or the keys don't beep, replace the batteries before trying the code again.

Keep the door from swinging open hard. The steel door is heavy, and the hinge is concealed to deter tampering, so guide it open rather than letting it drop.

How the 6108 lock behaves

The 6108 uses a programmable digital code plus a key entry, and it ships with two emergency keys. The control type is a touchpad, so you press the keys rather than turn a dial.

The box also has a foam padded floor mat, which means delicate items sit on padding instead of bare steel. If you're storing jewelry or watches, that mat is worth knowing about before you load the safe.

What do you do if the code won't work or the keypad is dead?

Open it with the backup key first, then reset the code or change the batteries. Both Honeywell lock types ship with keys, and the digital models include two emergency keys for exactly this case.

Uncover the keyhole and turn the backup key to release the door. Once it's open, you can reach the battery compartment and swap in fresh batteries.

Then clear the old code and set a new one following the manual.

A dead keypad doesn't mean a broken safe. It usually means the batteries ran down, and the key bypasses that completely.

If the backup key is lost too, a locksmith who handles small home safes can open it. For an inexpensive fire chest, replacing the chest is often cheaper than a locksmith visit.

Where do you find a replacement Honeywell safe key?

Read the number stamped on your existing key or on the lock face, then use it to order a match. Honeywell's support page lists key and part numbers for its models, so the number is the fastest route to a replacement.

Check the key head first. Many Honeywell keys carry a code that identifies the cut.

If the key is gone, the lock cylinder or the area around it often shows the same number.

Honeywell's support site also publishes manuals and part lists. Search by the model number on the safe, such as 1102 or 6108, to find the right document.

Don't buy a generic key and force it. A key cut for another lock can jam the cylinder and make the safe harder to open.

Which Honeywell models does this guide cover?

The steps fit Honeywell's molded fire chests and its keypad security safes, the two lock families most buyers own. Model numbers matter when you order a key or a replacement part.

The Honeywell 1103 Fire Chest is a key-lock model with a 30-minute UL fire rating up to 1550°F. Its waterproof seal is rated for 100 hours at 39 in of water, and it holds letter documents flat.

The interior measures 3.7 in high, 13.1 in wide and 8.5 in deep, which is why A4 and letter pages fit without folding.

The Honeywell 1102 Fire Chest is the smaller key-lock chest. It takes folded letter documents and #10 envelopes upright, with a 30-minute fire rating and a 24-hour waterproof seal.

Its interior is 4.6 in high, 9.6 in wide and 6.0 in deep, so the shape is taller and narrower than the 1103.

The Honeywell 6108 Hideable Safe is the digital type. It has a programmable code, two backup keys, double steel walls and a foam-padded floor mat.

Its exterior is 5.5 in high, 12.7 in wide and 10.4 in deep, and it can be mounted to a wall or floor.

If you're still choosing between models, our guide to Honeywell fireproof safe models sorts the chests by size and rating.

How should you close and lock a Honeywell safe again?

Shut the lid or door fully, then lock it and test the handle before you walk away. A safe left unprotected defeats its purpose, and a fire chest left open loses its seal.

On a key chest, close the lid, press it down evenly and snap both side latches. Turn the key to lock, then pull the lid to confirm it's held.

On a digital safe, close the door and turn the knob to the locked position. Enter the code once more to test that the lock releases and catches as it should.

Store the backup keys somewhere outside the safe. A key locked inside the safe is no help when the keypad fails.

On the key-lock chests, keep one key on your ring and leave the spare somewhere you can reach without opening the safe.

How does opening a Honeywell safe compare with other brands?

Honeywell's approach is simple: key locks on fire chests and keypads on steel safes, with backup keys on both. Most small home safes follow the same pattern, so the steps carry over.

Some buyers weigh Honeywell against SentrySafe for fire chests. Our SentrySafe vs First Alert comparison covers how the brands differ on locks and ratings.

For a keypad model from the other brand, the SentrySafe SFW123GDC review walks through its code setup.

The general steps for key and combination fire chests also work on other brands. Our guide to how to open a fireproof safe covers the wider group.

What should you do before you call support?

Check the battery, the latch position and the key code first, because those three fix most Honeywell safe opening problems. Support can help when those fail.

Try fresh batteries on a keypad safe. Make sure both side latches are released on a chest.

Confirm you're using the matched key and not a lookalike.

Then look up the model number and find its manual on Honeywell's support page. The manual lists the exact code sequence, the battery type and the key part number.

If the safe still won't open, contact Honeywell support with the model number and what the lock does when you try. That gives them enough to point you to a fix or a replacement key.

Warranty terms differ by family, so mention that too. The 1103 carries a lifetime after-fire guarantee, while the 1102 has a 5 year limited warranty.

That tells support which replacement route applies.

The short answer to how to open a Honeywell safe stays the same: use the key on a key-lock chest, use your code on a keypad model, and keep the backup keys outside the safe.

Frequently asked questions

How do I reset a Honeywell digital safe if I forgot the code?

Use one of the backup keys to open the door, then follow the model's instructions to clear and set a new code. Most Honeywell keypad safes include two emergency keys in the box for exactly this situation.

Can a locksmith open a Honeywell safe without the key?

A locksmith who works on small home safes can usually open one by picking the lock or drilling it. Expect to show proof that the safe is yours.

For a cheap fire chest, a replacement is often the simpler choice.

Why won't my Honeywell safe open after I enter the code?

The most common causes are a weak battery and a code that was never saved. Try fresh batteries first.

If the keypad still ignores the code, open it with the backup key and set the code again.

Do all Honeywell safes use the same key?

No. Keys are matched to each safe, and the number stamped on the key or the lock helps identify a replacement.

Honeywell's own support page lists the key and part numbers for its models.

How long does a Honeywell safe battery last?

There is no single answer, because it depends on the model and how often the keypad is used. A safe that beeps oddly or lights the keypad dimly is telling you to change the batteries before the code stops working.